Upload
Login or register

basshead

Last status update:
-
Date Signed Up:5/10/2011
Last Login:8/07/2016
FunnyJunk Career Stats
Content Thumbs: 77 total,  173 ,  96
Comment Thumbs: 4570 total,  5287 ,  717
Content Level Progress: 40% (2/5)
Level 5 Content: New Here → Level 6 Content: New Here
Comment Level Progress: 70% (70/100)
Level 242 Comments: Doinitrite → Level 243 Comments: Doinitrite
Subscribers:1
Content Views:26115
Times Content Favorited:7 times
Total Comments Made:2583
FJ Points:4560

latest user's comments

#16910 - Welp, the cobalt's finally starting to go back together. Got …  [+] (1 new reply) 06/26/2015 on /cars/ +1
User avatar
#16944 - basshead (06/26/2015) [-]
Whelp, I'm very not lucky, definitely not gonna be running today, and I'm having to leave tomorrow with family for a stupid 2 week family reunion/road trip thing in montana, so my car's just gonna fucking sit half assembled for another fucking two weeks, it's been out of commission for just about a month already, and now another two weeks on top of that, I hate everything right now.
#16883 - It's a cobalt, so I don't know if I'd go so far as saying &quo… 06/25/2015 on /cars/ +1
#154 - Oh god yes please I love these. 06/23/2015 on Gob Stories Reboot: The... 0
#27 - Pretty sure dudebro didn't hit the water there.  [+] (1 new reply) 06/21/2015 on Isded comp +1
User avatar
#69 - lorinthium (06/21/2015) [-]
lol i just said looks like never did i say he definely hit water XD
#16692 - People are dicks sometimes, it's nice when that one helpful pe… 06/21/2015 on /cars/ 0
#16655 - Benz e63 AMG, because as much as I hate german cars in general… 06/18/2015 on /cars/ +1
#16424 - Thanks, heading to a couple machine shops tomorrow to get some… 06/11/2015 on /cars/ 0
#16422 - I haven't gone over it with a fine tooth comb yet, which I pro…  [+] (2 new replies) 06/11/2015 on /cars/ 0
User avatar
#16423 - malkovo (06/11/2015) [-]
well, good luck with the project
User avatar
#16424 - basshead (06/11/2015) [-]
Thanks, heading to a couple machine shops tomorrow to get some advice, so we'll see what comes from that.
#16410 - Production date is early '06, almost all the rest of them came…  [+] (4 new replies) 06/10/2015 on /cars/ 0
User avatar
#16411 - malkovo (06/10/2015) [-]
that is some shit to do, any cracks in the block from that?
User avatar
#16422 - basshead (06/11/2015) [-]
I haven't gone over it with a fine tooth comb yet, which I probably should do, but, from a quick visual inspection I haven't noticed anything wrong with the block at all, at least this far.
User avatar
#16423 - malkovo (06/11/2015) [-]
well, good luck with the project
User avatar
#16424 - basshead (06/11/2015) [-]
Thanks, heading to a couple machine shops tomorrow to get some advice, so we'll see what comes from that.
#16390 - It's finally done, I finally got my head off. Damn thing foug…  [+] (6 new replies) 06/09/2015 on /cars/ +1
User avatar
#16402 - malkovo (06/09/2015) [-]
how old is that engine? i can't really see a reason for the head bolts would give you a hard time like that
User avatar
#16410 - basshead (06/10/2015) [-]
Production date is early '06, almost all the rest of them came out nicely, but it was just this one that gave me an issue, mainly because the socket that I was using was starting to round off due to being a 12 pt and not a really strong one, so that contributed to it starting to round off I think. Although yeah, manual says they're only supposed to be torqued to 22 ft-lbs, but, then an additional 155 degrees due to being stretch bolts so iunno. Still had to use a cheater on the end of a pretty large 1/2" wrench to get most of them to even break loose, but. I'm guessing it might partially be because of whatever happened to cause the crack to be there initially, possibly the previous owner overheating it or something.
User avatar
#16411 - malkovo (06/10/2015) [-]
that is some shit to do, any cracks in the block from that?
User avatar
#16422 - basshead (06/11/2015) [-]
I haven't gone over it with a fine tooth comb yet, which I probably should do, but, from a quick visual inspection I haven't noticed anything wrong with the block at all, at least this far.
User avatar
#16423 - malkovo (06/11/2015) [-]
well, good luck with the project
User avatar
#16424 - basshead (06/11/2015) [-]
Thanks, heading to a couple machine shops tomorrow to get some advice, so we'll see what comes from that.